CZPTmer melt pump for plastic sheet extrusion line
CZPT pumps occur in a variety of kinds and measurements to suit the needs of your extrusion, compounding or polymer generation process.
Benifits of the metering pump melt gear pump
one. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-50% after using melt pumps.
two. improving the product quality
three. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
4. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable
CZPT pump picture
Technica data
one.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.)
three.Max.Outlet pressure: 350Bar
4.Max.CZPTential pressure: 275Bar
five.Heating method: CZPT Steel Cartridge Heater
6.CZPTening parts: 12.9 high-strength screws
7.Voltage: 380V(Others are optional)
eight.Frequency: 50Hz(Others are optional)
| Kind | Volume (cc/r) |
Max rotary Speed (r/min) |
Outlet pressure (MPa) |
Inlet pressure (MPa) |
Stream rate L/h | Temperature | ||
| Minimal viscosity one-1000Pa·s |
Higher viscosity a thousand~8000Pa·s | CZPT-higher Viscosity ≥8000Pa·s |
||||||
| GM-ME-5 | five. | one hundred | ≤35 | ~30 | ≤20 | ≤12 | ≤8 | ≤350ºC |
| GM-ME-7.five | 7.five | one hundred | ≤35 | ~thirty | ≤20 | ≤18 | ≤10 | |
| GM-ME-10 | ten | 100 | ≤35 | ~30 | ≤20 | ≤25 | ≤15 | |
| GM-ME-twenty | twenty | 90 | ≤35 | ~30 | ≤80 | ≤40 | ≤24 | |
| GM-ME-31.5 | 31.five | 90 | ≤35 | ~thirty | ≤150 | ≤80 | ≤42 | |
| GM-ME-50 | fifty | 80 | ≤35 | ~30 | ≤220 | ≤120 | ≤70 | |
| GM-ME-75 | 75 | eighty | ≤35 | ~thirty | ≤280 | ≤180 | ≤90 | |
| GM-ME-a hundred | 100 | 80 | ≤35 | ~thirty | ≤350 | ≤230 | ≤120 | |
| GM-ME-160 | a hundred and sixty | 80 | ≤35 | ~30 | ≤550 | ≤350 | ≤175 | |
| GM-ME-two hundred | 200 | eighty | ≤35 | ~30 | ≤700 | ≤450 | ≤250 | |
| GM-ME-250 | 250 | 80 | ≤35 | ~30 | ≤800 | ≤600 | ≤300 | |
| GM-ME-355 | 355 | 80 | ≤35 | ~thirty | ≤1000 | ≤750 | ≤350 | |
| GM-ME-500 | five hundred | 60 | ≤35 | ~thirty | ≤1500 | ≤1000 | ≤500 | |
| GM-ME-750 | 750 | sixty | ≤35 | ~thirty | ≤1850 | ≤1500 | ≤750 | |
| GM-ME-a thousand | 1000 | 60 | ≤35 | ~30 | ≤3000 | ≤2000 | ≤1000 | |
| GM-ME-1600 | 1600 | fifty | ≤35 | ~thirty | ≤4000 | ≤3000 | ≤1500 | |
| GM-ME-2500 | 2500 | 50 | ≤35 | ~30 | ≤6000 | ≤4500 | ≤2200 | |
| GM-ME-3150 | 3150 | 50 | ≤35 | ~30 | ≤7000 | ≤5200 | ≤2600 | |
| GM-ME-4000 | 4000 | 40 | ≤35 | ~30 | ≤8000 | ≤6000 | ≤3000 | |
| Remark:the melt equipment pump movement is associated with the function speed, materials viscosity, pressure, So the model choice you should question for us. |
||||||||
Software fields
CZPTmer CZPT(movie, pipe, plate, sheet, granulation )
Large Temperature or Higher Viscosity CZPT (Pc, PMMA, Abdominal muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
CZPT Fiber CZPT (polyester for cotton-fiber, polypropylene )
Other CZPTmer CZPT CZPT (rubber, asphalt, paint, adhesives, coatings, lubricants)
CZPTmer melt pump for plastic sheet extrusion line